A pneumatic industrial cartridge gun with threaded retainer featuring a quick air exhaust to reduce drips. Suits (310ml) 1/10 Gallon size caulking tube cartridges and pre-filled sealants/ silicones. For the controlled application of most adhesives, fluids, sealants, RTV, grease, gels, long cure or single part epoxies, mastics and potting compounds.

Includes built-in adjustable air regulator, 1/4" BSP barb thread air connector. Compatible with all 310ml pre-filled silicone and sealant caulking tube cartridges (typically 215mm long by 45mm diameter).

Connect the air line to a supply. Undo the threaded front cap and load in a 10oz (310ml) cartridge. Replace the cap and screw tightly to secure the cartridge. Attach a threaded nozzle or use a male luer lock adapter with any standard needle tips. Press trigger for flow and adjust regulator for control.

Connect the air line to a supply. Undo the threaded front cap and load in a 310ml cartridge. Replace the cap and screw tightly to secure the cartridge. Attach a threaded nozzle or use a male luer lock adapter with any standard needle tips.

Press trigger for flow and adjust regulator for control. If you are using pre-filled sealant or silicone cartridges, use part TSD931-296 euro adapter fitting to provide a connection to our nozzles or with part TSD931-7 when using luer lock tips. All products are industrial grade and are covered by our no-quibble One Year warranty.