Cartridge gun dispensers are designed for the controlled
application of pastes, gels, adhesives and fluids. We offer our
customers the most cost effective cartridge gun dispensing systems.
All guns are covered by a one year warranty and supplied with a
starter kit of dispensing components.
A heavy duty metal pneumatic
cartridge gun with quick attach retainer and fast air exhaust shut-off to
reduce drips. For 32 ounce size cartridges or pre-filled sealant/
silicone cartridges.
Suited to controlled lines or potting of most
adhesives, fluids, sealants, RTV, grease, gels, long cure or single part
epoxies, mastics and potting compounds. Airline hose is ordered separately.
Undo the metal cartridge body retainer. Load in a filled 32oz size
plastic cartridge. Replace the retainer and twist tightly to secure the
cartridge.
Attach a threaded nozzle or use a male luer lock adapter with any
standard needle tips. Squeeze pressure to dispense and adjust your regulator
or your mains air supply for flow control.
The gun is constructed of
steel and other durable materials. Gun will operate up to 100 psi (6.9 bar).
Touch control on trigger regulates the flow. This gun operates quietly over
long periods of time.
This gun includes
(1) gun, (1) cartridge, (1)
plunger, (1)
flange cap, (1)
tip cap and (1)
nozzle, (1)
tip adapter and (1)
tip. Or select the full gun kit that includes (10)
of each part above included with the gun applicator.
The guns are robust and handle most liquids and pastes dispensed from
them. The handle cap uses a hard wearing rubber gasket seal for the retainer
that can be replaced after very long periods of use. Gaskets held in
stock.
Items
are shipped in the UK by a courier on a next day tracked and
insured service for all items that are available from stock. Items on a
lead time will be shipped as soon as they are made available.
Warranty: All guns are covered by a 1 (One) Year manufacturers warranty
against fault.
Typical Uses: Guns are portable and can be used in a factory
production or maintenance area, in an assembly department as well as for
repair and re-work. Guns are commonly used in the field for repair or
maintenance applications.
Common Applications:- Deposits
of solder paste, Deposits of solder flux, Grease to bearings, Potting
components with epoxy, RTV to edge seams, Silicone shots to bond
products, Gasket sealant repair, Aircraft maintenance work, General
adhesive applications.
Adhesive Dispensing Ltd provide a wide
range of equipment options for dispensing almost all assembly fluids - from
watery liquids, solvents, primers and activators through to thick pastes,
sealants, silicones, gels and epoxies.
More Info
Part
No.
Specs
Colours
Lead Time
Pack
Price GBP
Add
Large capacity 550 series pneumatic guns for use with 10oz
(310ml), 20oz and 32oz sized cartridges. Threaded retainer with
bezel. Lightweight aluminium cartridge retainers. Balanced design
for handling such large volume of cartridge dispensing.
Interchangeable retainers can be used on these 3 sizes of reliable
guns. Read more...
233688 PneumaticCartridge Gun Datasheet
32 Ounce Threaded Retainer
Black
Around 2-3 Weeks
1
each
More Info
Part
No.
Specs
Colours
Lead Time
Pack
Price GBP
Add
Industrial grade cartridges and
plungers for controlled dispensing
of sealants, adhesives, glues, silicones,
solvents, pastes and resins. All cartridges
feature a 1/4 Inch nozzle thread.
Cartridges are safe for use to 100 psi
pressure and are certified silicone free
plastics.
Read more...
TS32CKIT
32oz Cartridge HDPE
2.67" OD/ 13.75" Long
Natural/ White
24 Hours
10
pack
TS32C
32oz Cartridge HDPE
2.67" OD/ 13.75" Long
Natural
24 Hours
10
pack
TS20P Cartridge Plunger 20 and
32 Ounce only
2.57" OD
White
24 Hours
10
pack
TS20P-LD Cartridge Plunger 20 and
32 Ounce only
2.57" OD
Natural
24 Hours
10
pack
More Info
Part
No.
Specs
Colours
Lead Time
Pack
Price GBP
Add
Reusable flange end caps and threaded
tip caps for sealing both ends of
the cartridge air tight once materials have
been transferred into them. Supplied in
sealed packs with labels and batch codes. Cartridge
caps are certified silicone free
plastics.
Read more...
TS6C End Cap LDPE 20 and 32 Ounce
only
67mm Dia.
Red
24 Hours
10
pack
AD3PB
Tip Cap Threaded Seal HDPE
21mm Dia.
Blue
24 Hours
10
pack
TS3P
Tip Cap Threaded Seal HDPE
21mm Dia.
Red
24 Hours
10
pack
TS6P-RED
Tip Cap Threaded Seal HDPE
21mm Dia.
Red
24 Hours
10
pack
TS6P-BLACK
Tip Cap Threaded Cap
21mm Dia.
Red
2-3 Weeks
1000
pack
TS4P-RED
Tip Cap Push-In Cap
21mm Dia.
Red
1-2 Weeks
1000
pack
TS5P-BLACK
Tip Cap Push-In Cap
21mm Dia.
Black
2-3 Weeks
1000
pack
TS5P-GREEN
Tip Cap Push-In Cap
21mm Dia.
Green
2-3 Weeks
1000
pack
More Info
Part
No.
Specs
Colours
Lead Time
Pack
Price GBP
Add
Industrial dispensing nozzles
with 1/4 Inch thread for leak free
attachment to cartridges and dispensing
valves. Supplied in
sealed packs with labels and batch codes. Cartridge
nozzles are safe to 100 PSI and are certified silicone free
plastics.
Read more...
Copyright
2019 Adhesive Dispensing Ltd. All transactions subject to Adhesive
Dispensing Ltd standard
Terms & Conditions, E&OE.
Prices are
in UK pounds. Vat is not charged on orders placed outside the EU
and any EU orders are exempt from VAT only if a valid company VAT number is
provided to us at time of order or before shipping. Products are covered by a 12-month warranty against
faults and malfunction.
All orders online are
encrypted for safety and security. Please read our
privacy agreement for details. We also
process phone or fax payments by credit and debit card. Please contact
our accounts department if you would like to open a credit account with
us.
Disclaimer: While reasonable efforts have
been made to ensure all information on this website is accurate,
Adhesive Dispensing Ltd. do not assume responsibility for any errors
or omissions. All specifications, illustrations, data and prices are
subject to change without notice.
TSR2201 Robot 200mm x 200mm adhesive dispensing/title>
